2-plug ECU Brackets - 2GR-FE V6 ECU for SW20
$50.00
These brackets allow you to mount the 2-plug style ECUs (rav4 & 3rd gen sienna) in the stock MR2 ECU position.The extra holes in the...
View full product details
2GR Fuel Feed and Return Lines w/ Radium Regulator
$300.00
Complete fuel system for your 2GR swapped MR2. Custom made, permanently crimped -6 PTFE line from the regulator to the motor, and a braided rubber...
View full product details
2GR V6 Axle Carrier Bracket
$175.00
This bracket is designed to hold the right side axle stub when the E153 is mated to the 2gr-fe motor. This bracket positions the axle...
View full product details
2GR-FE V6 Weld-on Water Neck Filler Port
$150.00
Frankenstein Motorworks creates this custom casting as its intended to weld onto the end of the stock 2gr-fe waterneck to add a filler port and...
View full product details
Berk 3" Dual Exhaust System - SW20 MR2
$585.00
3/17/21 UPDATE: Berk exhausts are out of stock until late May 2021. Buy your exhaust now to secure your purchase before they go out of...
View full product details
Engine Overhaul Full Gasket Kit - MR2
$460.00
Refreshing your engine? If so, pick up a Toyota OEM engine gasket overhaul kit. Includes nearly every gasket for the engine when performing a rebuild....
View full product details
Fidanza Flywheel Friction Surface Plate
$75.00
Don't replace your Fidanza flywheel. Just swap out friction plates, and you'll be up and running without breaking the bank. Fidanza 9.5 inch Friction Kit...
View full product details
Lightweight Flywheel - Fidanza
$420.00
Looking to have your motor rev a little faster? Pick up one of our Fidanza lightweight flywheels! Fitment: Gen2 Gen3 Gen4 Gen5 3SGTE 5SFE V6...
View full product details
MR2 2GR-FE Exhaust Y-Pipe
$825.00
The Wilhelm Raceworks Y-Pipe for 2GR-FE swaps into the SW20 MR2 connects the V6 headers (on our site) to the Berk Technology muffler. 304 stainless steel TIG...
View full product details
MR2 2GR-FE Motor Mount - SW20
$449.00
This is a custom motor mount used to mount the 2GR-FE toyota engine into a 1990-1999 Toyota MR2. The other three mounts are the stock...
View full product details
MR2 2GR-FE Pedal Adapter
$150.00
This adapter allows the the stock 2GR-FE toyota avalon accelerator pedal to be mounted on the LHD MKII MR2's firewall.
View full product details
MR2 2GR-FE Swap Headers
$799.00
This Pair of headers are designed specifically for use in the MKII MR2 chassis with a 2GR swap. the outlet location does not match the...
View full product details
MR2 2GR-FE V6 Water Neck
$299.00
Frankenstein Motorworks creates this custom casting as its intended to weld onto the end of the stock 2gr-fe waterneck to add a filler port and...
View full product details
Tuned 2GR-FE Manual Trans ECU (Highlander, Rav4 and Sienna)
$525.00
These ECUs are modified for use with a manual transmission specifically for swaps and have the following changes: Automatic transmission DTCs removed Evap/Cat DTCs removed...
View full product details
V6 Intake System - 2GR-FE V6 for SW20
$400.00
This intake system simplifies the 2GR-FE engine swap by solving the common problem of building a MAF pipe and intake system that matches the OEM...
View full product details
Wire Harness Conversions
$250.00
The most critical conversion part you need when performing an engine swap is a plug and play engine wire harness. Believe us when we tell...
View full product details