3" Air Intake System - 3SGTE
$160.00
The TCS 3" Air Intake Kit is made to be used with the Gen2, Gen3, Gen4, and Gen5 generations of the 3SGTE engines installed in...
View full product details
3" Round Air Filter
$20.00
This is the 3" air filter we use on our builds. Fits any intake piping with a 3" inch diameter. Specs: Air Filter Style: Conical Height...
View full product details
4" Air Intake System - 3SGTE
$130.00
The TCS 4" Air Intake Kit is made to be used with the Gen2, Gen3, Gen4, and Gen5 generations of the 3SGTE engines installed in...
View full product details
AFM Adapter
$18.00
Mass Air Flow Sensor Adapter Plate; For Toyota Applications & vehicles equipped w/ Bosch AFM sensors; For Use w/ 3" Inlet ID Filters Only
View full product details
APEXi Power Intake MR2 Turbo 91-95
Sold Out
The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic...
View full product details
BLOX Velocity Stack Air Filter and Silicone Hose
$75.00
BLOX Racing Performance Filter Kit w/ 3.0" Velocity Stack Air Filter and 3.0" Silicone Hose For Use w/ 3" Inlet ID Pipes Only
View full product details
BPV Bypass Valve Block Off Plate - SW20
$35.00
Want your MR2 to drive much smoother and quieter.? Want your MR2 to hold boost pressure better and no lag between shifts? If so buy our...
View full product details
Breather Filter - 1"
$10.00
This is the filter we use to connect to the stock BPV. 1" diameter inlet
View full product details
Breather filter for IAC - 3/4"
$10.00
This is the filter we use to connect to the IAC hardline on a 3SGTE or similar engine. This filter has a 3/4" diameter inlet....
View full product details
Catch Can - 3SGTE
$175.00
The Racer X Fabrication Catch can for the Toyota MR2 was designed to reduce oil in the air stream when exiting the PCV and crankcase....
View full product details
Center Feed Intake Manifold - 3SGTE
$790.00
The Racer X Fabrication center feed intake manifold for the 1991-1995 Toyota MR2 is a perfect addition to any build!! Increases in horsepower and torque...
View full product details
Greddy Type F Blow off Valve
$245.00
The GReddy FV Blow Off Valve is a new generation of blow off valve/ The unique "Floating Valve" design incorporates a revised adjustable dual spring...
View full product details
HKS Super Sequential SQV4 Universal Blow off Valve
$295.00
HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating...
View full product details
Intake Bending Reducing Coupler 2.75"-3"
$15.00
Black coupler for installing an intake system on the factory turbocharger. 2.75" inlet and 3" outlet bending reducing coupler.
View full product details
K&N Air filter (for OEM airbox) - SW20 MR2
$55.00
This is a drop in replacement air filter for a stock airbox in a: 1991-1995 MR2 (NA or Turbo) 1988-1993 Celica Alltrac FEATURES * High Air Flow...
View full product details
K&N Air filter Service kit
$16.00
K&N 99-5000 Filter Care Service Kit AerosolA six-step maintenance system designed to clean any K&N Filtercharger® Air Filter. Restores air flow efficiency so your Filtercharger...
View full product details
K&N FIPK Intake Kit - SW20 MR2
$215.00
K&N Fuel Injection Performance Kits (FIPK's) for the 1991-1995 MR2 turbo are built for many different vehicles and represent a dramatic improvement over a K&N...
View full product details
Side Feed Intake Manifold - 3SGTE
$790.00
The Racer X Fabrication side feed intake manifold for the 1991-1995 Toyota MR2 / Celica is a perfect addition to any build!! Increases in horsepower...
View full product details
Straight Runner Intake Manifold - 3SGTE
$790.00
The Racer X Fabrication straight runner intake manifold for the 1991-1995 Toyota MR2 is a perfect addition to any build!! Increases in horsepower and torque...
View full product details
T-Bolt Clamps
$6.00
Get your T-bolt clamps from PRIME. Available in a multitude of sizes. Order based on the size of your aluminum or stainless pipeThese 304 Stainless...
View full product details
Throttle Body Inlet - 3SGTE
$75.00
Use the OEM 3SGTE throttle body and bolt on this free flowing inlet for more power! Increases air speed with tapered inlet for 2.5” or...
View full product details
TiAL Q Blow Off Valve 50mm
Sold Out
The TiAL Q is the first revision of the original TiAL BOV. The Q bolts up to any standard TiAL flange, no re-welding. This is the...
View full product details
Valve Cover AN fittings - 3SGTE
$25.00
Press fit -10 AN fittings for your 3SGTE valve covers No welding needed Completely reversible, press in with a vise Removes restrictive PCV tube and allows...
View full product details