DIY Gen5 3SGTE Swap Package - SW20 MR2
$1,375.00
NOTE: We no longer ship DIY kits internationally or through any freight forwarders. Sorry for the inconvenience. Applications: These packages are tailored to fit the...
View full product details
DIY Gen4 3SGTE Swap Package - SW20 MR2
$1,175.00
NOTE: We no longer ship DIY kits internationally or through any freight forwarders. Sorry for the inconvenience. Applications: These packages are tailored to fit the...
View full product details
Intercooler COMPLETE kit - Gen2 Gen3 3SGTE
$499.99
The most complete intercooler setup for your SW20 Toyota MR2 with a GEN2 or Gen3 3SGTE Engine! Comes complete with: Upgraded aftermarket intercooler core Intercooler...
View full product details
Intercooler COMPLETE kit - Gen4 Gen5 3SGTE
$499.99
The most complete intercooler setup for your 91-95 Toyota MR2 with a GEN4 or Gen5 3SGTE Engine! Comes complete with: Upgraded aftermarket intercooler core Intercooler...
View full product details
South Bend Stage 2 DAILY Clutch Kit S54 hybrid
$399.00
PRIME's Recommended usage is daily, street and moderate race. This is the perfect clutch for a 250-325 wheel horsepower car. This is our hybrid clutch...
View full product details
Timing Component Kit - 3SGTE
$415.00
If you are planning to install your 3SGTE yourself, pick up PRIME's 3SGTE timing component kit! We offer a package for a Gen2, Gen3, Gen4,...
View full product details
Lightweight Flywheel - ACT Prolite
$299.00
Fitment: 3SGTE engine (10.1 lb) The Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response...
View full product details
Lightweight Flywheel - Competition
$299.00
Fitment: 3SGTE engine (12 lb) 1ZZ engine (10 lb) 2ZZ engine (10 lb) Competition Clutch flywheels are made of 4140 forged steel and are a one-piece...
View full product details
Downpipe 3" Gen4 Gen5 3SGTE
$259.99
PRIME Full 3" Downpipe w/ Integrated Flex Section. This is a direct bolt on for a Gen4 or Gen5 3SGTE powered MR2 Turbo or Celica...
View full product details
Wire Harness Conversions
$250.00
The most critical conversion part you need when performing an engine swap is a plug and play engine wire harness. Believe us when we tell...
View full product details
Shifter Cable Set (turbo model E153) - SW20 MR2
$169.99
Replace your worn out or broken shift cables with our new replacement cables. These are sold as a set and are intended for E153 transmission...
View full product details
Water Neck Modified - Gen4 Gen5 3SGTE
$165.00
You must ship your water neck to us after placing an order for this part. We need your core to modify and ship back to...
View full product details
Water Neck Top - 3SGTE
$159.99
The TCS Motorsports Water neck directly replaces the factory water neck tops that is located on the drivers side of the 3SGTE engine. It bolts...
View full product details
Clutch Disc ACT - S54 Transmission
$159.00
This is a custom 20 spline ACT clutch disc ONLY for an MR2 turbo (3SGTE engine) when using the MR2 NA S54 transmission.If you are...
View full product details
Hub and Bearing S54 to E153 Conversion Kit - SW20
$159.00
Looking to swap your S54 transmission for a E153 transmission? Well one of the parts you will need is the correct MR2 turbo knuckes(or hubs)....
View full product details
4" Air Intake System - 3SGTE
$130.00
The TCS 4" Air Intake Kit is made to be used with the Gen2, Gen3, Gen4, and Gen5 generations of the 3SGTE engines installed in...
View full product details
3" Air Intake System - 3SGTE
$160.00
The TCS 3" Air Intake Kit is made to be used with the Gen2, Gen3, Gen4, and Gen5 generations of the 3SGTE engines installed in...
View full product details
Exedy 3SGTE Pressure Plate
$100.00
Pick up our Exedy 3SGTE pressure plate. Fits all 3SGTE flywheels. Additionally, You can use this pressure plate with the ACT S54 hybrid clutch disk...
View full product details
Walbro 255lph Fuel Pump and Install Kit
$99.00 $119.00
Looking for a new fuel pump? Pick up a genuine Walbro GSS341 255LPH fuel pump from Prime! This pump will keep up with all of...
View full product details
Full Throttle Cable Replacement - SW20 MR2
$89.99
This cable is a FULL replacement. This will replace your throttle cable all the way from the gas pedal to the Cruise Control Carousel or...
View full product details
Fuel Feed Line - 3SGTE
$119.00
This is the fuel line you need when installing a Gen3, Gen4, or gen5 3SGTE engine into your 1985-1989 MR2 or 1991-199 MR2. This fuel...
View full product details
Tach Adapter - Gen4 or Gen5 3SGTE
$79.00
Your tachometer in your 1985-1995 MR2 will not work with the Gen4 OR Gen5 3SGTE engine due to their lack of distributor. This device converts the...
View full product details
Water Neck Adapter - Gen3/4/5 3SGTE
$49.00
This adapter is a complete conversion kit for the GEN2 3SGTE coolant neck (stock component on any 91-95 MR2 turbo). The adapter is o-ring sealed...
View full product details
Throttle Cable Cruise Control Gen5 - SW20 MR2
$39.99
Gen5 3SGTE Cruise control throttle cable - This cable is meant to connect the factory cruise control carousel to the Gen5 3SGTE throttle body which...
View full product details
Throttle Cable Cruise Control Gen4 - SW20 MR2
$39.99
Gen4 3SGTE Cruise control throttle cable - This cable is meant to connect the factory cruise control carousel to the Gen4 3SGTE throttle body which...
View full product details
DIY Installation Manual - Gen4 3SGTE into SW20 Chassis
$39.00
You asked for it and we delivered! This is a 100+ page manual documenting the installation of a GEN4 3SGTE into the 91-99 MK2 MR2...
View full product details
Coolant Burping Funnel
$35.00
This is the funnel you need to burp the MR2 cooling system effectively and completely The spill-free funnel eliminates trapped air pockets which usually cause...
View full product details
Flywheel bolts - 3SGTE / Beams
$30.00
(8) Brand new Toyota flywheel bolts for any 3SGTE engine. Also fits the Beams redtop 3SGE.Remember to use red loctite on these fasteners and torque...
View full product details
Walbro Fuel Pump Install Kit
$25.00
Check out our installation kits for the Walbro in-tank fuel pumps. These are complete installation kits and include the wiring, hoses & clamps, filter sock....
View full product details
Fuel Return Line - 3SGTE
$20.00
Has your return line been cut off or in bad shape? Pick up our fuel return line. This is standard 1/4" fuel hose and fuel...
View full product details
Throttle Cable Knarp Stop
$10.00
These are used to shorten your throttle cable to the appropriate length and be able to fit inside the original Toyota throttle cable carousel. Useful...
View full product details
Breather Filter - 1"
$10.00
This is the filter we use to connect to the stock BPV. 1" diameter inlet
View full product details
Throttle Cable Stops
$10.00
These are used to shorten your throttle cable to the appropriate length and be able to fit inside the original Toyota throttle cable carousel. Useful...
View full product details
Pressure Plate Bolts
$10.00
(6) Brand new Toyota flywheel bolts for any Toyota pressure plate with a M8x1.25 bolt. These are direct fit for any year Toyota MR2. Remember...
View full product details
Axle carrier bearing locating pins
$6.00
These are the E153 axle carrier bearing bracket locating pins. On a Gen2/3 these pins are pressed into the block already, however on a Gen4...
View full product details