RacerX Cold Air Intake - FR-S / BRZ / GT86

RacerX Cold Air Intake - FR-S / BRZ / GT86

$389.00

Worldwide shipping available

When it comes to intakes for the Scion FRS / Subaru BRZ / Toyota 86 there were already plenty of options. It is perhaps one of the most popular products for the platform, unfortunately, many of them fall short. The OEM air box is designed well and makes true gains difficult. The Racer X Fabrication cold air intake had to provide horsepower and torque gains and stay within OEM parameters to operate correctly. With over 2 years in development, 20 prototypes, and over 100 dyno pulls, we can finally introduce you to the air intake box we are proud to offer. Peak gain from the intake is 9 wheel horsepower and 7 ft/lbs of torque, as well as gains throughout the RPM range.

Air box is constructed from aluminum
Formed velocity stack with correct taper angle
CNC machined MAF flange
Air intake tube is sized for OEM MAF sensor
Utilizes and includes rubber isolators for mounting
TIG welded
Made in the USA, at Racer X Fabrication
DYNO RESULTS <-- MUST LOOK!!!

Install Time: 30 mins to 1 hour
Installation Guide

CONSTRUCTION

We went through multiple design iterations, 9 different filter types (including panel and conical filters) and 3 different configurations of velocity stacks, all of which are sized to operate within the MAF sensor range from OEM. The air box incorporates the use of the OEM factory air snorkel due to its affect on air flow into the air box and filter. The air box itself is cut from aluminum sheet then bent and TIG welded on the back and driver side. The air filter is installed on the throttle body side and sealed with foam and Stainless steel fasteners to secure it. The velocity stack is formed with a large bell mouth and tapered to increase airflow. We use a large 4.5" performance high flow filter, that enters into a 90 degree bend and finally the torque tube that is designed to collect the air flow after the 90 degree bend and bring it back to acceptable flow before entering the throttle body.

COMPATIBILITY

2013+ Scion FR-S
2013+ Subaru BRZ
2013+ Toyota GT86

⟵ Back to Intake - FRS/BRZ/GT86

Reviews

5.0

5 ★★★★★ ★★★★★

3,008 reviews

3,008

3008

Showing 1 - 6 of 3,008 reviews. 1 - 6 of 3,008 reviews

Sort By:

Ezra Gondelman

Lutz, FL

5 ★★★★★ ★★★★★

1 day ago

A little accident fixed

When I first ordered new spark plugs for my 3sge BEAMS engine I was accidentally sent the wrong ones. One quick email later, and the correct ones were on their way. Very pleased with the customer service and looking forward to buying more parts.

View product

Product:

Spark plugs - MR2 Celica

ENRIQUE IBARRA

Gonzales, CA

5 ★★★★★ ★★★★★

1 week ago

Percent asf🙏🏽

I have purchased 3 faulty slave cylinder from 3 different websites but once I installed prime mr2 slave cylinder It worked righr away and i got no problems with it and my car feels 10x better🫡 I would of took better pics but my engine is still hot haha

View product

Product:

Clutch Slave Cylinder - MR2 SW20

Brandon Grigsby

Royal Oak, MI

5 ★★★★★ ★★★★★

1 week ago

Perfect fitment

Affordable, showed up quick and was packaged well. I revamped the brakes and decided to ditch the old rubber for stainless. Everything fit perfect. Along with a fresh bleed of Motul the difference in pedal feel was noticeable.

View product

Product:

Stainless Steel Brake Lines - MR2

Brandon Grigsby

Royal Oak, MI

5 ★★★★★ ★★★★★

1 week ago

Quality rotor with oem fitment

PrimeMR2 hits the mark every time. The rotors were packaged well, delivery was fast as always. Recently overhauled the suspension and brakes with struts, mounts, poly bushings, pads/rotors, and ss brake lines. It completely revived my new MR2.

View product

Product:

Brake Rotor Replacement - SW20 MR2

Joel Priore

Salem, OR

5 ★★★★★ ★★★★★

1 week ago

Tie Rod Ends Left & right

Good factory length and fit, only difference is a lock nut instead of the castle nut and pin. There is plenty of room for two lock nuts if you are concerned at all.