Deatschwerks Fuel Injectors - FR-S / BRZ / 86

Deatschwerks Fuel Injectors - FR-S / BRZ / 86

undefined
0
0
Regular price$319.00
/
  • Worldwide shipping available

DeatschWerks has your fueling needs covered for the Scion FR-S / Subaru BRZ. Available in 450cc, 700cc, 900cc, and 1500cc for the port manifold fuel injection system.

In addition to the special features of the DW BRZ / FR-S fuel injectors, all DW injectors feature E85 Compatibility, excellent spray pattern and atomization for optimized idle and tuning, custom flow report with every set, flow matched and balanced to within 2%, and 12 month comprehensive warranty.

All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. For our customers, this means better fitment, easier tuning, and increased reliability. All injectors are backed with a comprehensive 12-month warranty.

Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, we have added what we consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors we produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure our customers only receive the best end product. All of our testing is performed in-house on our custom built New Age Technologies injector flow bench.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Reviews

5.0
5
3,001 reviews
3,001
3001
Showing 1 - 6 of 3,001 reviews. 1 - 6 of 3,001 reviews
 
ENRIQUE IBARRA's avatar image.
ENRIQUE IBARRA
Gonzales, CA
5
6 days ago
Percent asf🙏🏽
I have purchased 3 faulty slave cylinder from 3 different websites but once I installed prime mr2 slave cylinder It worked righr away and i got no problems with it and my car feels 10x better🫡 I would of took better pics but my engine is still hot haha
Photo thumbnail
Photo thumbnail
Brandon Grigsby's avatar image.
Brandon Grigsby
Royal Oak, MI
5
1 week ago
Perfect fitment
Affordable, showed up quick and was packaged well. I revamped the brakes and decided to ditch the old rubber for stainless. Everything fit perfect. Along with a fresh bleed of Motul the difference in pedal feel was noticeable.
Photo thumbnail
Brandon Grigsby's avatar image.
Brandon Grigsby
Royal Oak, MI
5
1 week ago
Quality rotor with oem fitment
PrimeMR2 hits the mark every time. The rotors were packaged well, delivery was fast as always. Recently overhauled the suspension and brakes with struts, mounts, poly bushings, pads/rotors, and ss brake lines. It completely revived my new MR2.
Photo thumbnail
Joel Priore's avatar image.
Joel Priore
Salem, OR
5
5 days ago
Tie Rod Ends Left & right
Good factory length and fit, only difference is a lock nut instead of the castle nut and pin. There is plenty of room for two lock nuts if you are concerned at all.
Photo thumbnail
Photo thumbnail
Photo thumbnail
Photo thumbnail
4+
ENRIQUE IBARRA's avatar image.
ENRIQUE IBARRA
Gonzales, CA
5
6 days ago
Loved it
10/10 i have purchased all my mr2 parts on here and I will continue to because not a single item has ever been faulty 💪🏽
Photo thumbnail
Photo thumbnail
ENRIQUE IBARRA's avatar image.
ENRIQUE IBARRA
Gonzales, CA
5
6 days ago
Percent asf🙏🏽
Easy install and i love the stainless style look
Photo thumbnail